EWBF Equihash miner

[DEVEL214]

Miner EWBF Equihash miner
=============================================

This miner works only with the new version of the Equihash algorithm - Equihash 192.7 and 144.5. Coins,
working on the old Equihash algorithm is not supported yet.

************************************************** *********************************************
always the latest miners, bat files and utilities for mining: https://bytwork.com/soft/mining
---
for mines, .bat files and other utilities for mining: https://bytwork.com/soft/mining
************************************************** *********************************************

Link: https://mega.nz/#!nrpxRKZA!IUN__grfziZ4 ... K2ewhn5pZE

Use the latest drivers. The work of the miner requires up to 1.1 GB of GPU video memory.

For systems with a large number of video cards, set the virtual memory size to at least 16GB (more is better): Computer / Properties / Advanced system settings / Advanced / Performance / Options / Advanced / Virtual Memory and specify the size of the paging file.

This miner is free, however, the current fee to the developer is 2%.
If you do not agree with the developer remuneration - do not use this miner or use the option "-nofee".
Attempts to cheat and non-payment to the developer will lead to a decrease in the speed of mining (in the same way as using "-nofee 1") despite the fact that the miner will display the same hashrate.
The miner will not stop when the cheat is detected, because then the creators of the cheat will understand that the cheat does not work, and will look for other ways of cheating. When the miner does not show any errors and slowdowns - they are happy.

This miner supports only the most popular Nvidia chips.


Options
-----------

--help, -h - show the description of the settings (in English. Language).

- server is the name or IP address of the Stratum server (pool).

--port - server port number (pool).

--user - server login (pool).

--pass - server (pool) password.

--pec - show energy efficiency calculator and energy consumption statistics: 1 - yes, 0 - no.

--cuda_devices - specify the numbers of used video cards separated by a space. Without this option, all available maps are used.

--eexit - exit in case of error. Possible values: 1 - exit if it is impossible to restart the cards, 2 - exit if the connection with the pool is lost, 3 - exit in both cases.

--log - create a text log miner.log in the miner directory. Possible values: 0 — do not create, 1 — write only errors, 2 — duplicate all console output.

--logfile - specify the name of the log file

--config - specify the configuration file. In this case, all other command line parameters are ignored.

--intensity - indicates the maximum intensity of mining. Possible values: from 1 to 64. You can specify for each card separately through spaces, for example: --intensity 64 64 64 64

--tempunits - specify temperature units. Possible values: C - degrees Celsius, F - Fahrenheit, K - Kelvin

--templimit - temperature limit at which the video card will be excluded from the extraction process. After lowering the temperature, mining will be resumed. Note: if you specify a too low value, at which the miner often excludes the card from mining, and the option --eexit 1 or 3 is specified, then after three unsuccessful attempts to start the miner will finish its work.

--fee - developer's commission, can be specified with tenths, for example: 0, 1, 2.5, 1.5, etc.

--api - use monitoring API. Without a parameter, the miner will accept connections at 127.0.0.1:42000. You can specify an alternative value in the format address: port, where port: 1000 - 65535.


TROUBLESHOOTING
--------------------

1. Install the latest drivers.
2. Return the cards to the nominal frequencies (remove overclocking).
4. Install a virtual memory of 16 GB.
5. Restart the computer.
6. Check the hardware, raisers.



Questions and Answers

1. If you think that the miner will work, even if you turn off the router, wait a few more minutes, it will stop.
2. Mining on laptops is a bad idea.
3. You will not see the full hash rate on the pool immediately, you need to wait at least 15 minutes.

-----------
All questions and suggestions, please send to our customer service team@bytwork.com
-----------
If this instruction and customized files were helpful to you, you can support the bytwork.com project by running mining for a while on our wallet.
Successful mining!