RevenueBOT.io - Automated BOT Trading On TOP Cryptocurrency Exchanges.

[RevenueBot]

RevenueBOT.io - is automated trading software for trading on cryptocurrency exchanges. NO SUBSCRIPTION FEES.YOU PAY ONLY WHEN YOU GET PROFIT (20% from profit). Exchanges: Bittrex, Bitfinex, Binance, Cex, Poloniex, Exmo, Livecoin, Huobi, Kukoin


WHAT IS REVENUEBOT?

• RevenueBot is automated trading software for trading on cryptocurrency exchanges that uses the application programming interface (API).

• The work of the bot is based on the use of volatility rates of crypto coins. The bot can trade any pair of crypto coins available on the selected exchange.

• You can run several bots simultaneously and trade several pairs of crypto coins on the same exchange or on different ones.

• The bot works from the "cloud" day and night, there is no need to install software on your computer and leave it running so that the bot does not interrupt its working.

• The bot works fully automatically, but it needs to be configured. Our service does not impose any specific settings and does not offer the services of fiduciary management of cryptocurrency and your finances.

• We can recommend successful strategies you already have in the bot's template settings, but only you can decide how the bot will work.

• Our service provides convenient interfaces for access to all possible settings of the bot, as well as complete trade and income statistics.

HOW MUCH ARE THE REVENUEBOT SERVICES? WHAT IS THE BALANCE OF THE REVENUEBOT ACCOUNT?

• We have neither a monthly fee nor commission for transactions on crypto exchanges. We take a commission of 20% only from the profit you receive when trading with the bot. You don‘t need to spend your money to use our bot!

• To withdraw a commission, there is a balance of the RevenueBot account.

• Every time a bot gets a profit, the commission is withdrawn from the account balance. Each transaction is displayed on the profile page. With a negative balance, the bot won’t start, and the running bot will stop.

• It is necessary to ensure that the account balance is positive. With a negative balance, the user has 72 hours to recharge it, after that time the account will be suspended and all bots will stop trading.

HOW DOES REVENUEBOT WORK?

Using API on exchanges, the bot opens new trades following the selected algorithm and tracks how they are executed.
Nowadays there are two algorithms the RevenueBot works with:

1) «Long» Algorithm

The work of the bot is in cycles and is based on the principle of buying cheaper when the course falls (the initial part of the cycle) and selling for more when the course increases (the final part of the cycle). The idea is that having a certain deposit, the bot does not buy the entire amount at once, but in parts when the price falls, using the order grid calculated in advance.

The first order in the grid is the closest to the current price and the smallest in volume. Each subsequent order is more voluminous (the martingale system is used) and cheaper. Therefore, when the price falls, the bot buys more and more, but at a lower price, which allows you to make a final profitable trade, selling everything you bought at a price much lower than the bot have started buying.

To make such a transaction, we make a profit, the bot calculates everything and starts a new cycle of work. Profit is obtained in the second coin of the traded pair. The success of such trading is determined by the number of orders in the grid, the difference in their weights, the distance between them, the indent of the first order and how deep the last order in the grid will be from the current price.

All these indicators can be set in the settings. Details on each of the settings you can find in the FAQ section on creating a bot.


2) «Short» Algorithm

The working principle is the same as that of the long algorithm, it is based on the sale when the rate rises and the buying when the rate drops.

Depending on the settings, the bot calculates and places a grid of sell orders to sell more and more as the price rises.

After that, the bot tracks the placed orders and, if they are executed, it places a buy order at a lower price than they have been sold.

In this algorithm, profit can be obtained in the second coin of the traded pair or in the first one.

Profit in the first coin is suitable for example for those who hold promising altcoins for a long time and want to increase their initial deposit in altcoin by trading them to btc and not to earn in btc.


More info in our FAQ page and our blog.


Just try it!


Official website: https://revenuebot.io/

Blog: https://blog.revenuebot.io/

Registration: https://revenuebot.io/register.html


Please contact us right away here or write a message in our Customer Chat if you have any questions regarding the service.

[RevenueBot]

This guide will help you to create and manage your first bot. Please read the instruction and follow the steps.

First of all, login to https://revenuebot.io/, then enter menu “Bots” https://app.revenuebot.io/office/#/bots/



Open menu “CREATE NEW BOT”







Identifying, API and bot wallet

• Bot name: The name of the bot.

• Exchange: Select the exchange in the drop-down list (Binance in our example)

As soon as you choose the exchange, you will see new fields:

• Pair: Select a trading pair.

• API key: Select an API key from previously created ones or create a new one.

• Depo: Choose a virtual wallet from previously created ones or create a new one. For convenience, you can check the balance on the stock exchange online.

Then you should fill in the fields:

• Name of the wallet. Choose such a name for the wallet that can be easily identified.

• Comment to the wallet for convenience. (Optional).

• Select the exchange in the drop-down list.

• Select a cryptocoin in the drop-down list.

• Enter the amount or percent of the deposit in the account on the stock exchange.

• Here you can select the appropriate API key to check online balance of the coin on the exchange.

Commission: Select the commission option that will be used by the exchange. This setting is relevant only for the Binance exchange, because it is possible to pay a commission in the third token that does not participate directly in current trading (BNB token).To use this type of commission, it is necessary to activate it in the account of the Binance exchange.



We recommend you always to use this type of commission payment on the Binance exchange as it is cheaper.



It is only necessary to monitor that BNB amount on the account. To do this, our bot checks the BNB balance before each launch and if the balance is less than necessary, the bot does not run and sends a notification to the user with information to recharge the BNB token balance to start trading.






Choosing the right algorithm for the bot


Algo: Select the algorithm for the bot: long or short, description is here https://revenuebot.io/faq.html#how-does-revenuebot-work)

After selecting the bot algorithm, the user is prompted to use the bot settings templates, such as: Light trade mode, Normal trade mode or Extreme trade mode.








When clicking on the template, the settings are automatically filled. You can skip this step and set each of the settings by yourself. You can create your own templates as well.









Rate cover: The rate cover of price changes. This value sets how many per cent of the current price the last order in the order grid will indent.
First order indent: Indent of the first order in per cent. This value sets how many per cent of the current price the first order in the order grid will indent.
Price rate to use: Select the rate on the exchange from which to calculate. It can be such rates, as buy, sell, avg, last.
Orders matrix, martingale: Order Grid and Martingale.




Here you can specify the number of orders in the grid and martingale (by how many per cent each next order in the grid will be weightier than the previous one). Here you can also see which grid of orders you will have. To do that you should click the “View orders matrix” button.






Profit: Here you can set the profit in per cent that will be used by the bot when calculating the price of the completing cycle of the order.
Profit coin: This setting is available only for the short algorithm. It sets in which of the traded coins there will be a profit.
Cycle up: It happens sometimes that the bot has placed an order grid, and the price has changed radically. So you need to wait for the price to recover and it can last long. This waiting can be avoided by setting the updating of the order grid to the current price. Here the percentage is set, and when it is reached, the current order grid is canceled and a new one is set.
Sleep before cancel orders for cycle up: Here you can set the delay in minutes before starting to cancel the current order grid when the Cycle up setting goes off. This setting allows you to avoid frequent cancellations of the current order grid when the price has changed in a very short time and recovered. You can wait a bit in order not to cancel the current order grid unnecessarily.
Sleep before cycle up after cancel orders: Here you set the delay in minutes before setting a new grid after cancelling the previous order grid. This setting also allows you to avoid negative consequences if the price has changed in a very short time and recovered.
Sleep after end of cycle: Here you set a delay in minutes before starting a new cycle after the end of the current cycle.




Additional Settings


add revenue to depo: When making a profit, you can add it to the depo, which the bot uses, and increase the deposit in such a way. When the setting is on, the entire profit from the bot is transferred to the virtual wallet that is used by this bot.
logarithmic scale for orders: Usually, the order grid is calculated so that all orders are arranged linearly there, at the same distance from each other over the entire price overlapping.


During small fluctuations, there will be the smallest orders in the grid executed.
To involve more deposit in the trade during small price fluctuations, you can use the logarithmic distribution, which will increase the density of orders close to the current price and will reduce the order density when moving away from the current price.

The order density can be configured for different situations in different ways using the logarithmic factor by increasing or decreasing it. Here you can also see which order grid you will get if you click the “View orders matrix” button:








cost limit: Use this setting in order not to start buying orders too expensive and not to sell them too cheap. It sets the maximum price above which the bot will not start the cycle for the Long algorithm, as well as the minimum price below which the bot will not start the cycle for the Short algorithm.
fix first partial order with profit: It happens sometimes that the first order in the grid has been partially executed, but the price changed rapidly. This happens when the bot operates a large deposit and the orders in the grid are quite voluminous, even the very first one.


In such a situation, you can wait a long time for the price to recover and for the order to be fully executed so that the algorithm can continue working.

By enabling this setting, you can set a percentage of profit for calculating such a price, by reaching which you get a profit, if you cancel a partially executed order and put the order that completes the cycle for its full sum. After all, the price has changed so, that we can get a profit, just the order turned out to be too voluminous.



Notiications



Use the notifications you need: WEB, E-mail, SMS, Telegram



Then click “Create New Bot”.



Thank you for your time!


Just try it!



Official website: https://revenuebot.io/

Blog: https://blog.revenuebot.io/

Registration: https://revenuebot.io/register.html



Please contact us right away in Customer Chat if you have any questions regarding our service.

[RevenueBot]

We want to show you some screenshoots of our users' bot work (with their consent).
Here is the table with all work cycles of bot for 24 hours. In every cycle you can see the depo for bot work (In amount), start and end time, trading pair and profit in the end-of-cycle. The cylces with profit are marked as Completed. The cylces which were cancelled and closed to the current exchange rate.


1) Bot work in LONG algorithm with enabled function - automated switch of trading pair. As you can see in screenshoot - the trade was carried out in DNT/BTC, MDA/BTC, LOOM/BTC, MOD/BTC, DNT/BTC, LINK/BTC. The switching was based on the results of volatility analyser - the most appropriate and effective cryptocurrency trading pair was chosen. Profit - in BTC.
Trading date - 8th of December




2) Pair AION/BTC - trade in SHORT algorithm. Profit - in BTC. It should be noted that in SHORT algo you can get profit in first coin. In our example it is AION.
These cycles are filtered by compleated to reduce the height of the screenshoot.
Trading date - 7th of December




3) Pair QKC/BTC - trade in LONG algorithm. Profit - in BTC.
Trading date - 15th of December



More info in our FAQ page and our blog.


Just try it!


Official website: https://revenuebot.io/

Blog: https://blog.revenuebot.io/

Registration: https://revenuebot.io/register.html



Please contact us right away in Customer Chat if you have any questions regarding our service.

[RevenueBot]

New updates:


1) Now you can save Table View Settings even after logout. Configue your own view of trading information.



2) User-friendly search by keyword. Now you can find the information of the bot or cycle you need much faster.



3) We added "Rate" in table view settings - the rate which is needed to end the cycle and get profit




Wish you good trade, https://revenuebot.io/

[RevenueBot]

Any currency volatility is unstable.
Sometimes the volatility is high and the bot makes many profitable deals. Sometimes the price doesn’t change and the bot has to delay.
The bot may also delay if the initial trading pair doesn’t correspond with the start filters.
To avoid bot downtime, we’ve implemented automatic trading pair switching.

Variations of automatic switch:


1) Automatic switch of trading pair according to the user list.

If the current trading pair doesn’t correspond with the start filter requirements, you may create a list of different pairs, which the bot will search until it finds the one that fits the start filter.

2) Automatic switch of trading pair according to the volatility analyzer results.

At the start of its operation, the bot may change the preset trading pair for a different one, with more profitable volatility indicators.
Volatility analyzer calculates the number of multidirectional price volatility for the recent past, and is used for cryptocurrency volatility evaluation.
The bot switches to the currency with higher volatility.
It’s important not to just choose the currency with higher volatility, but also to eliminate those involving trade risks.

Settings used in analyzer: Period, Interval, Rate Сhange %, Min rate change count, Min trade volume, Pump/Dump.

More information in our blog - Automatic switch of trading pair https://blog.revenuebot.io/2018/12/30/a ... ding-pair/

[RevenueBot]

It’s important to select the correct bot settings to receive more profit and to minimize the risks while trading with RevenueBot.
In order to choose optimal settings, we’ve developed a bot simulation mode to make it possible to see the way a bot would have traded with the real data for the previous 60 days with any of the trading pairs.
Try different bot settings and see the way it would have traded using real volatility schemes with a virtual deposit.



More information about this function in our blog - "Bot Simulation mode"

Wish you good trade

[RevenueBot]

We've added new exchanges: KRAKEN and HITBTC
Also you can use our bot absolutely free with HITBTC!