Powering S9i miner

[AlexLary]

I just got a 14TH/s antminer from bitmain Im using the Antminer Power Supply APW3++ for S9 or L3+ or D3 w/ 10 Connectors to power the miner. I didn't have a 220volt outlet so i bought a 3000 watt converter from 120volt to 240volt conv. But the converter can't handle the power it gets to hot after like 30 min. So I was trying to see if I could just buy another Antminer Power Supply APW3++ for S9 or L3+ or D3 w/ 10 Connectors so it runs on 2 psu with 120 volts. I just needed some help figuring out how to go about it.