New Funakoshi CUDA Miner v4.10 Win / Lin fastest miner for NVIDIA Win / Lin cards
Funakoshi CUDA Miner v4.10 where to download: https://mega.nz/#!5M8TBYZb!h_2D9MnEQjFo ... vMQgnPSiiA
Funakoshi CudaMiner is a simple console application for mining coins on NVidia video cards. The application is a console, i.e. running from the command line. By default, it is configured for Scrypt, but it can also support the following algorithms:
Scrypt-jane - (Yacoin and others)
Scrypt with more N - (VertCoin)
MaxCoin - (SHA-3 or Keccak256)
SHA-256d - (No GPU Acceleration)
Run the desired material, depending on the bit and the platform (x64 or x86).
Insert the following parameters into the .bat file:
cudaminer.exe -o http://127.0.0.1:8332 -u Username.Workername -p password
add fields Username.Workername, password and http://127.0.0.1:8332 (pool address) substitute their values.
With a successful launch, each found ball will be displayed in the miner console window, where you can see the performance and time.
The speed is calculated in the number of hashes found per second. If we consider Litecoin, then as a rule it is kh / s.
The main options to run CUDAMiner:
-a, --algo = ALGO regardless of which algorithm to use (default: scrypt)
scrypt - scrypt Salsa20 / 8 (1024, 1, 1), PBKDF2 (SHA2)
sha256d - SHA-256d (no GPU acceleration)
-o, --url = URL
URL - Server Address (default: http://127.0.0.1:9332/)
-O, --userpass = U: p
User: Password - for server
-u, --user = USERNAME
USERNAME - Server User
-p, --pass = PASSWORD
PASSWORD - Password for the server
--cert = FILE
FILE - Certificate for server using SSL
-x, --proxy = [PROTOCOL: //] HOST [: pORT]
Connection through a proxy server
-t, --threads = N
N - Number of threads (default: number of processors)
-r, --retries = N
N - Number of connection attempts if the server is unavailable (default: infinite)
-R, --retry-pause = N
N - Interval between connection attempts (default: 30 sec.)
-T, --timeout = N
N - Connection timeout (default: 270 sec.)
-s, --scantime = N
the upper limit of the time spent on the current scan job when a long poll is unavailable, in seconds (default: 5)
--no-longpoll
Turns off support for X-Long-Polling
--no layer
Turns off support for X-Stratum
-q, --quiet
Turns off the speed display
-D, --debug
enable debugging output
-P, --protocol-dump
detailed reset of actions at the protocol level
--no-auto settings
Turns off auto tuning
-d, --devices
CUDA Mining devices. Specified by a comma and begin with 0.
-l, --launch-config
Startup configuration for each device. Specified by comma.
-i, --interactive
Interactive mode for devices that work not only for mining. Specified by comma.
-C, --texture-cache
Specifies which devices should use the texture cache. Values 0-turn off, 1-turn on. Specified by comma.
-m, --single-memory
Allocates solid blocks in the memory for mining. Values 0-turn off, 1-turn on. Specified by comma.
-H, --hash-parallel
Where make part of the calculations SHA2 for scrypt and scrypt-jane algorithms. (default: 2)
0 - On CPU
1 - Multithreading on CPU
2 - Performs all calculations on the GPU
-L, --lookup-gap
Splits the memory requirement into hash memory at this ratio, saving only every Nth value in notepad. The default value is 1.
- time limit
maximum time before my exit from the program.
--benchmark
work offline testing
-c, --config = FILE
Download configuration file in JSON format.
-V, --version
Display version information on screen and exit.
-h, --help
Displays help on the screen and exits.
The interface is quite simple, enter the nickname miner settings, a link to the pool, the name of the worker and the password. The rest will be done by the program itself (including optimizing the settings for your card).
If you wish, you can forcibly set the blowing speed of the video card or adjust the threshold levels of comfort and closing the miner.