Alexio35
Posts: 2
Joined: Fri Apr 26, 2019 11:56 pm

Donate BTC of your choice to 1MeyaLxQACZwCcBdtQhNLGZfPe6hHqvxQy

Antminer S9 don't start

Sat Apr 27, 2019 12:00 am

Hello,
My Antminer s9 don't want to start, I plug on for 30 minutes several times, reset a lot of times too but any of red and green light turn on.
Ethernet light work. But only one of 3 hashing board have the red light.
Please help.
(Sorry for english)
Thank you.

Alexio35
Posts: 2
Joined: Fri Apr 26, 2019 11:56 pm

Donate BTC of your choice to 1MeyaLxQACZwCcBdtQhNLGZfPe6hHqvxQy

Re: Antminer S9 don't start

Mon Apr 29, 2019 7:05 pm

This is my kernel logs:

Here is my kernel logs :
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
0
1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000313] ps7-ttc #0 at df804000, irq=43
[ 0.000630] Console: colour dummy device 80x30
[ 0.000663] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090255] pid_max: default: 32768 minimum: 301
[ 0.090479] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090500] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092671] CPU: Testing write buffer coherency: ok
[ 0.093025] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093087] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.093313] L310 cache controller enabled
[ 0.093333] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.171044] CPU1: Booted secondary processor
[ 0.260231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260366] Brought up 2 CPUs
[ 0.260385] SMP: Total of 2 processors activated.
[ 0.260394] CPU: All CPU(s) started in SVC mode.
[ 0.261069] devtmpfs: initialized
[ 0.263496] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264750] regulator-dummy: no parameters
[ 0.273314] NET: Registered protocol family 16
[ 0.275631] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.277949] cpuidle: using governor ladder
[ 0.277962] cpuidle: using governor menu
[ 0.285498] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.287046] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.287061] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.287183] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.309818] bio: create slab <bio-0> at 0
[ 0.312279] vgaarb: loaded
[ 0.313014] SCSI subsystem initialized
[ 0.313896] usbcore: registered new interface driver usbfs
[ 0.314069] usbcore: registered new interface driver hub
[ 0.314300] usbcore: registered new device driver usb
[ 0.314828] media: Linux media interface: v0.10
[ 0.314989] Linux video capture interface: v2.00
[ 0.315232] pps_core: LinuxPPS API ver. 1 registered
[ 0.315244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giomettilinux>
[ 0.315368] PTP clock support registered
[ 0.315732] EDAC MC: Ver: 3.0.0
[ 0.316784] Advanced Linux Sound Architecture Driver Initialized.
[ 0.319777] DMA-API: preallocated 4096 debug entries
[ 0.319793] DMA-API: debugging enabled by kernel config
[ 0.319892] Switched to clocksource arm_global_timer
[ 0.339831] NET: Registered protocol family 2
[ 0.340586] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.340645] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.340730] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.340780] TCP: reno registered
[ 0.340798] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.340833] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.341078] NET: Registered protocol family 1
[ 0.341452] RPC: Registered named UNIX socket transport module.
[ 0.341464] RPC: Registered udp transport module.
[ 0.341473] RPC: Registered tcp transport module.
[ 0.341481] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.341495] PCI: CLS 0 bytes, default 64
[ 0.341957] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.344057] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.346220] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.346428] msgmni has been set to 967
[ 0.347244] io scheduler noop registered
[ 0.347258] io scheduler deadline registered
[ 0.347296] io scheduler cfq registered (default)
[ 0.358316] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.358336] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.484003] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.051837] console [ttyPS0] enabled
[ 1.056145] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.063792] [drm] Initialized drm 1.1.0 20060810
[ 1.080940] brd: module loaded
[ 1.090391] loop: module loaded
[ 1.100009] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.105755] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.113792] libphy: XEMACPS mii bus: probed
[ 1.118161] ------------- phy_id = 0x3625e62
[ 1.123100] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.131981] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.138598] ehci-pci: EHCI PCI platform driver
[ 1.145853] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.152706] usbcore: registered new interface driver usb-storage
[ 1.159568] mousedev: PS/2 mouse device common for all mice
[ 1.165742] i2c /dev entries driver
[ 1.172607] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.178092] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.184083] Xilinx Zynq CpuIdle Driver started
[ 1.188937] sdhci: Secure Digital Host Controller Interface driver
[ 1.195069] sdhci: Copyright(c) Pierre Ossman
[ 1.199369] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.206198] mmc0: no vqmmc regulator found
[ 1.210326] mmc0: no vmmc regulator found
[ 1.249950] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.258652] usbcore: registered new interface driver usbhid
[ 1.264160] usbhid: USB HID core driver
[ 1.268894] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.275192] nand: Micron MT29F2G08ABAEAWP
[ 1.279159] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.285096] Bad block table found at page 131008, version 0x01
[ 1.291318] Bad block table found at page 130944, version 0x01
[ 1.297370] 3 ofpart partitions found on MTD device pl353-nand
[ 1.303149] Creating 3 MTD partitions on "pl353-nand":
[ 1.308241] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.316353] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.323686] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.332697] TCP: cubic registered
[ 1.335936] NET: Registered protocol family 17
[ 1.340662] Registering SWP/SWPB emulation handler
[ 1.346560] regulator-dummy: disabling
[ 1.350947] UBI: attaching mtd1 to ubi0
[ 1.878927] UBI: scanning is finished
[ 1.890619] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.897669] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.904466] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.911142] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.917979] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.923990] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.931100] UBI: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1134783803
[ 1.940130] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.949329] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.949334] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.953374] ALSA device list:
[ 1.953379] No soundcards found.
[ 1.969800] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.999071] UBIFS: recovery needed
[ 2.073681] UBIFS: recovery completed
[ 2.077350] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.083300] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.092407] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.102303] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.107326] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.118866] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.126292] devtmpfs: mounted
[ 2.129398] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.973028] random: dd urandom read with 0 bits of entropy available
[ 3.399914]
[ 3.399914] bcm54xx_config_init
[ 4.009950]
[ 4.009950] bcm54xx_config_init
[ 7.010782] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.016873] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 20.129880] In axi fpga driver!
[ 20.132950] request_mem_region OK!
[ 20.136341] AXI fpga dev virtual address is 0xdf9fc000
[ 20.141494] *base_vir_addr = 0x8c510
[ 20.157308] In fpga mem driver!
[ 20.160526] request_mem_region OK!
[ 20.164030] fpga mem virtual address is 0xe2000000
[ 20.969350]
[ 20.969350] bcm54xx_config_init
[ 21.599285]
[ 21.599285] bcm54xx_config_init
[ 24.599871] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 24.605891] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 5385.699961] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 807c4d0c6880881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
Find /tmp/searcherror: U6:1 The last log is below:
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 807c4d0c6880881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0xcc
chain[5] PIC need restore ...
After restore: chain[5] PIC fw version=0x00

Return to “Mining support”

Who is online

Users browsing this forum: No registered users and 12 guests